Overloaded portable and now it does not start
If you had overload and now it wont start, my guess is you may have flooded it out. I would pull the spark plug , clean and try to start. It may also need a maintenance depending on the hours of use. Fuel, air and spark. Not much to it so if it doesn't start , those items may be the problem. If still does not work you will need to take to a service dealer close to you.
Related Articles
How does a manual transfer switch differ from an automatic transfer switch?
Automatic transfer switch senses utility power. After sensing 5 seconds of no utility, the generator engine will start. Once the engine is up to speed and creating power, the transfer switch will automatically transfer from utility power to generator ...
Checking Engine Oil Level
IMPORTANT NOTE: Check oil level daily when power outages necessitate running the generator for extended periods. Caution - Verify proper type and quantity of engine oil prior to starting engine. Failure to do so could result in engine damage. What ...
Find a parts manual, install manual, owners manual, exploded view or wiring diagram.
When looking for any product information from Generac. First it is wise to have the serial number handy. Because inside model runs they may have a part that was discontinued and your model may have a specific part that was not in all models the ...
How to Clear Emergency Stop Alarm/Fault (E2800) in Air-Cooled Units
Why are you are getting this alarm? This error code will display on the controller screen when 1 or both of the auxiliary shut down switches is set to the off position. The switches were recently put on the units to meet code requirements in the ...
What does "Ready to Run" email mean?
The following Mobile link notification only indicates: your unit is ready to run and start if you were to have a power outage.